11
Hexagonal socket screw
Eccentric plate
Both clearances should be equal
MECHANICAL ADJUSTMENT
NEEDLE DROP
TO CHECK:
When the needle swings in the maximum zigzag width, the distance between both ends of the needle hole on
the needle plate and the needle drop positions should be equal.
If not, adjust as follows:
ADJUSTMENT PROCEDURE:
1. Remove the face cover (see page 4).
2. Set the pattern selector dial at the maximum zigzag width.
3. Loosen the hexagonal socket screw.
4. Turn the eccentric plate to adjust the needle drop.
5. Tighten the hexagonal socket screw.
6. Attach the face cover.
NOTE: Check the hook timing after this adjustment.
Summary of Contents for 43
