ENGLISH - 12
INTRODUCTION:
The ACRH-3 is a high-performance integrated amplifier designed for audiophiles and music lovers who require an
easy-to-use solution to play their music from vinyl or other high-quality formats and sources. It incorporates two independent
audio sections: the tube preamplifier and the semiconductor output stage. It combines the best of both worlds in a warm,
detailed sounding amplification system with the ability to handle loudspeakers with complex loads.
The preamplification section is based on a double tube per channel type 12AU7 (ECC82), which, having two output ports,
can be connected to another amplifier or a subwoofer. This independent section works as an interconnection point for
alternate equipment and the amplifier and its source regulated by vacuum tubes that improve instrument detail and dynamic
range.
The equipment has 4 line inputs and one for pickup. The phono preamp is high-quality and discreet, with enough gain to
drive moving-magnet, moving-iron, or moving-coil pickups or cartridges.
The amplifier is direct coupling and discrete semiconductor type AB+; this optimizes the junction between stages, avoiding
signal losses. Margules designed this module to handle high current allowing it to take challenging and complex loads.
ANA® (
Neuro-Acoustic Alignment
).
The development of ANA® (Neuro-Acoustic Alignment) technology is a Margules innovation based on how the human brain
perceives sound, prioritizing the harmonic structure over the fundamental tone. This technology is defined based on how
humans perceive and process sound.
This technological advance has its origin in the theory of captivating sound (beautiful sound). Our brain decodes information
from sound waves through our ears. When sounds are close, they keep us attentive due to the relationship between their
perception, the distance in which we perceive them, and their intelligibility. Distant sounds, even when intelligible, do not
attract our attention and are easily ignored.
We created our ANA® technology to achieve a more realistic sound with adequate frequency response, low distortion, and
high-precision harmonic reproduction, optimizing the relationship between source and listener to the maximum to enjoy
music in ways never available before.
TECHNICAL SPECIFICATIONS:
Power with 8Ω / 4Ω load:
100 / 160 Watts x Channel
Total
Harmonic
Distortion
(THD):
0.02%
Electric consuption (no signal):
40 Watts
Frequency
response:
10-30,000
Hz
Line
input
noise
max:
0.22
milivolts
Phonostage:
Gain:
40db
Impedance:
47 KΩ
Number
of
inputs:
4
Line
Level
1
Phono
Weight:
8 Kgs
Measurements:
Width:
43 cm
Height:
9.5
cm
Depth:
N/A.
Summary of Contents for Margules ACRH-3
Page 10: ...ESPAÑOL 9 NOTAS DE INSTALACIÓN ...
Page 18: ...ENGLISH 17 INSTALL NOTES ...
