Page 13
1.10 Technical assistance and mantenance
Routine and special maintenance shall be performed in accordance with the instructions contained in this man-
ual. For all cases not included and for any type of assistance, please contact the manufacturesr directly, sup-
plying the information contained on the plate fixed to the machine:
−
Machine model
−
Serial number
−
Year of construction
Correct reference guarantees quick and accurate answers.
−
If machine maintenance is not performed according to the supplied instructions, or if not original spare
parts are used without the written authorised of the manufacturer, or in any case in such a way as to
jeopardise the intactness or characteristics of the machine, the manufacturer shall consider himself re-
lieved of any responsibility regarding safety to people and defective operation.
−
Any not authorised modification shall render the warranty void.
−
In case of major or complex maintenance, refer to the instruction contained in this manual.
−
In case of doubt, contact the machine distributor or the manufacturer in order to guarantee safety under
any circumstance.
−
When removing heavy or bulky parts, make sure adequate lifting equipment is available.
−
Secure that the tools available are suitable for use and avoid improper use of implements or tools.
−
Any modification altering the characteristics of the machine from the point of view of safety and risk pre-
vention shall be made exclusively by the manufacturer, who will certify compliance of the machine with
all safety standards.
Therefore, any modification or maintenance that is not provided for in this document is to be considered arbi-
trary. In cases in which the maintenance required is not provided for in this usage and maintenance manual,
contact the machine distributor or manufacturer.
1.11 Terms of warranty
Maggi Technology S.r.l.
guarantees that the machine has been tested on company premises with positive
results. The duration of the warranty is
12 months beginning the date of delivery
.
Defects due to normal wear of parts that, by nature, are subject to rapid and constant wear (e.g. gaskets,
belts , brushes, fuses, etc.) are not covered by the warranty. The warranty for replaced or repaired parts ex-
pires on the expiry date of the machine warranty.
In addition
Maggi Technology S.r.l.
shall not be held responsible for machine conformity defects caused by
either the failure to comply with the regulations contained in the instruction manual or improper use or care of
the machine. The buyer is therefore entitled to the replacement of parts found to be defective, provided that the
failures haven’t been caused by tampering and, in the case of modifications, without previous written consent
from
Maggi Technology S.r.l.
The documentation has been drafted on the basics of the topics contained in the safety Directive and Regula-
tions in force. Therefore it is absolutely necessary to read all the volumes in their entirety to obtain the best
performance from the machine and guarantee a long life-span of all its parts.
The configuration of some parts or devices described or illustrated in the document may differ from of the ma-
chine and its specific setup developed in compliance with special needs or safety regulations. In this case
some descriptions, reference or procedures may be generic, however maintaining their effectiveness. The sup-
ply of special tools or implements with the machine is closely linked to the specific characteristics and the
safety standards in force in each country. Dimensioned drawings and photos all provided only as examples
and references for making the next easier to understand.
In pursuing a policy continuous product development and updating, the company reserves the right to change
both functional and aesthetic characteristics, to vary the design of any functional part or accessory, or to sus-
pend production and supply, without having to inform anyone and without incurring in any obligation.
In addition
Maggi Technology S.r.l.
reserves the right to introduce any structural or functional modifications,
as well as modify the supply of spare parts and accessories without prior notice.