Page 17
Advantages of boring from the bottom:
−
the panel’s good-face is protected from any mechanical components contact;
−
elimination definitely shavings from the hole;
−
the type of approach makes optimal automatic panel time and precision of execution;
−
the beginning/end of panel reading is made automatically by a laser sensor. It transfer the panel cutting
errors to the panel inward.
Below is represented the boring head configuration and its tools characteristic. Additional spindles are to be
decided at the moment of purchase
.
−
n°11 independent Vertical spindles
( A )
−
n°4+1 Horizontal heads with 1 spindles each
( B )
−
n.1 Blade Ø120 thickn.4mm (max 6 mm.)
( C )
Applicable tools
Types of drill bits applicable to this machine are: plane type
( D )
, V-point type
( E )
, hinge type
( F )
,with
chamfer , circular blade
( G ).
CAM Program installed on BSE 600 classifies the different types of
drill bits as follows:
Drill ( D ) ;
bit n.1 Plane type
Drill ( E ) ;
bit n.2: V-type
Drill ( F ) ;
bit.n.3: Hinge type
Drill ( G ) ;
bit n.4 with chamfer (max Ø20).
Circular blade ( H ) ;
Ø120x4 / 6mm
.
INFORMATION
INFORMATION
( D )
( E )
( F )
DANGER
The Ø35 mm drill bit can’t
be fixed on n.2 spindles.
( B)
( B)
( A)
( C)
( G )
( H )
