Page 60
5.2 Use of the machine _ 5.2.1 Duty Cycle
To begin a cycle of work 's operator initially must :
- 1 - Select an application or a separate work .
- 2 - Press the icon
"Start"
button on schermo.Il green
(A)
, lights up and flashes.
- 3 - Pedal
( B).
The reference pin
(C)
, the X-axis ,
"Stop Up"
rises from the floor and the clamp is open.
- 4- Enter the panel comparing it to the beat of
DX (D)
, and forward to the pin
"Stop Up."
- 5 - panel Set in juxtaposition to the group controrulliera
(E)
, acting on the pneumatic handle .
- 6
(B
) - Press the electric foot , to close the clamp and bring down the joke reference to
"stop down"
- 7 - Press selector green
( A)
, to start the drilling cycle.
5.2.2 Emergency stop
Facing an emergency situation press the emergency button to stop the machine
5.2.3. Restart after emergency stop
To restart the machine after the emergency stop just follow the below-stated procedure:
−
Turn the emergency button counter-clockwise to unlock the machine
−
Press the green button on the control panel to restart the machine
5.2.4. Residual risk
BORING SYSTEM EVOLUTION 1000
has been designed so as to minimize the need for manual intervention.
To reduce the residual risk the machine has been equipped with the following safety devices:
- Passive safety devices such as: fixed guards and covers protecting the access to the working components of
( Start )
( Stop Up )
Ref. X axis
( C )
( B )
( A )
( D )
( E )