Page 61
−
Active safety devices such as: emergency buttons and microswitches to stop the working cycle.
The machine has been equipped with some fixed barriers to minimize the residual risk arising from working
parts and/or related to the misfunctioning of some mechanical components. It is possible that the operator in
charge for installation and periodical maintenance is sometimes required to access the segregated areas inside
the machine and to work very close to dangerous mechanical and electrical components and to working parts;
in this case we recommend that the operator also use individual safety devices and take the greatest care.
During installation and /or maintenance operations always disconnect power plug
and air supply
5.2.5 Segregated areas
All areas inside the machine subjected to extraordinary maintenance operations, to be carried out by qualified
operators only, are to be considered as segregated areas. The personnel in charge for such maintenance ope-
rations has to take all safety measures in order to minimize the residual risk.
A periodical and accurate maintenance is the essential condition to ensure longlasting efficiency and
high reliability of the machine. It is advisable that the below-stated maintenance operations are carried
out with the greatest care and accuracy.
6.1 Maintenance
All maintenance operations are to be carried out by qualified personnel only, which is also supposed to
have knowledge of all relevant rules and normatives about health and safety matter at the workplace.
6.1.1 Warnings
It is compulsory to disconnect power plugs and air supply before carrying out periodical or extraordinary mainte-
nance procedure so as to use individual safety devices such as: appropriate working suite, safety glasses etc.
When carrying out maintenance operations always refer to this instruction manual. Turn to the manufacturer
before carrying out maintenance operations, that are not included in this manual.
6.1.2 Technical competence required for maintenance
Machine-cleaning is to be carried out by the operator daily.
Mechanical and electrical servicing is to be carried out by qualified personnel only
At the beginning of every section, referring to the different maintenance operations, a graphic symbol is
used to identify the required competence.
6.1.3 Cleaning
CAUTION
CAUTION
DAILY