9
14.
The appliance should have a minimum clearance of 12” from combustible construction at the sides and 10”
at the rear. Clearance from non-combustible construction is 6” on all sides the back
15.
When installing, be aware of the weight of the range. It is recommended to install on the floor.
16.
This device is not intended for built-in installation.
17. The installation should allow for proper air flow for combustion and should not block exhaust and
ventilation. ALWAYS follow all regulations regarding venting and exhaust.
18.
Make sure the exhaust does not interfere with the air intake of the device.
19. After installation, level the device and keep stable. DO NOT move or tilt the device during operation.
20. DO NOT block or interfere with the ventilation needed during normal operation.
