6
ElectricalConnection
Improperuseofthegroundedplugcanresultinthetherisk
ofelectricalshock.Ifthepowercordisdamaged,haveit
replacedbyanauthorizedservicecenter.
Thisrefrigeratorshouldbeproperlygroundedforyoursafety.Thepowercordofthis
refrigeratorisequippedwithathree-prongplugwhichmateswithstandardthreeprong
walloutletstominimizethepossibilityofelectricalshock.
Donot,underanycircumstances,cutorremovethethirdgroundprongfromthepower
cordsupplied.
Thisrefrigeratorrequiresastandard115/120VoltA.C.~/60Hzelectricaloutletwith
three-prongground.
Thisrefrigeratorisnotdesignedtobeusedwithaninverter.
Thecordshouldbesecuredbehindtherefrigeratorandnotleftexposedordanglingto
preventaccidentalinjury.
Neverunplugtherefrigeratorbypullingthepowercord.Alwaysgriptheplugfirmlyand
pullstraightoutfromthereceptacle.
Donotuseanextensioncordwiththisappliance.Ifthepowercordistooshort,havea
qualifiedelectricianorservicetechnicianinstallanoutletneartheappliance.Useofan
extensioncordcannegativelyaffecttheperformanceoftheunit.
Ifanyproblemswiththeappliancepersist,pleasecontactourCustomerService
Departmenttoconsultwitharepresentativeat(888)775-0202orvisitourwebsiteto
requestwarrantyserviceatwww.mcappliance.com.
Operating Your Refrigerator
The temperature control is located inside the refrigerator and in the freezer
compartment on some models. The temperature is factory preset to provide satisfactory
food storage temperatures. However, the temperature control is adjustable to provide a
range of temperatures for your personal satisfaction.
To adjust the temperature colder in the refrigerator compartment, press the SET button
on the control panel so that the display light shifts to a higher number. “1” is the warmest
setting and “5” is the coldest. To adjust the temperature colder in the freezer compartment,
move the Freezer Control knob towards the maximum setting. After each movement of
either control, allow 24 hours for the unit to adjust. If the unit is still not cold enough, repeat
until desired temperature is achieved.
To adjust the temperature warmer in the refrigerator compartment, press the SET button on
the control panel so that the display light shifts to a lower number. To adjust the temperature
warmer in the freezer compartment, move the Freezer Control knob towards the minimum
setting. After each movement of either control, allow 24 hours for the unit to adjust. If the
unit is still not warm enough, repeat until desired temperature is achieved.
Temperature Control
