7
WHAT TO DO...
When the fridge is not in use for a prolonged period:
¥ Remove the power plug from the power point.
¥ Remove all contents from the fridge.
¥ Dry the interior and leave the door open for a few days.
When you wish to move the fridge:
¥ Secure all movable parts and contents.
(Package them separately if necessary.)
¥ Transport the fridge only in an upright position. In any other position you
may damage the compressor.
Before calling service, please follow the checklist below.
This may save you an expensive service call.
WARNING
-Improper use of the grounding plug can result in a risk of electric
shock. If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug and a 3-slot receptacle that
will accept the plug on the appliance. The marked rating of the extension
cord should be AC115-120V, 10A, or more. If a grounding adapter is used,
make sure the receptacle box is fully grounded.
If the refrigerator seems too warm inside:
¥ Check that the door has not been opened too frequently or for too long.
¥ Check that the interior circulation is not obstructed by having too many
goods stored. (The fridge is overloaded)
¥ Did you store anything hot, without first cooling it to room temperature?
¥ Is there sufficient clearance around all sides and above the fridge?
If the fridge starts making any unusual noises:
¥ Is it wobbling? Re-level it and check if it now operates normally.
¥ Have any objects fallen behind the fridge? If so, remove them and check if
operation is now normal.
¥ Are any containers inside the fridge vibrating or resonating? If so, rearrange
them then check to see if operation has returned to normal.
8
CHANGING THE REVERSIBLE DOOR
This refrigerator has been built with the door hinges on the right.
If you wish to change the opening direction, follow the instruction below:
¥ Unplug the refrigerator from its electrical outlet.
¥ Empty everything in the refrigerator, including shelves, food, etc.
1. Remove the hinge cover on the right top
of the cabinet.
2. Remove the two screws (using a ratchet
tool with a 8MM socket) that hold the top
hinge to the cabinet. Keep these screws
for later use.
3. Lift the top hinge straight up to free the pin
from the socket on the top of the door.
4. Lift the door and place it on a padded
surface to prevent scratching it.
5. Remove the plug buttons from the upper
left holes as illustrated and transfer them
to the uncovered holes at the right side.
Be sure to press the plug buttons firmly
into the holes.
6. Lay the cabinet on its side down on the
floor. Remove the two screws that hold
the bottom hinge to the cabinet using a
10MM socket. Keep these screws and
washer for later use.
Top hinge
Hinge cover
Plug button
Bottom hinge
