10
OPERATING INSTRUCTIONS
THERMO GRIDDLE
Before operation, please read the user’s manual carefully. If the appliance has been immersed in water, please
stop using and call the technicians to check and repair or replace all the components that are immersed in the
water. Before using this appliance, please make sure that the main burner, pilot light burner and oil receiver are
correctly installed.
1.
Before igniting the pilot light, ensure there is no gas odor around the device. When first using or after
cutting off the gas supply, it may take several minutes to ignite the pilot light due to the air existing in the
pipeline or clearance of the inlet pipe.
2.
Switch on the pilot control valve by rotating it counterclockwise and ignite the pilot flame with an ignitor.
3.
Turn the knob counterclockwise to switch on the main burner valve. Select your desired temperature. The
temperature can be selected 150°F and 450°F, increasing by 5°F increments.
4.
After working, turn the knob counterclockwise to turn off the main burner.
NOTE
: Control knobs of the burners can be operated manually only. DO NOT rotate it with tools. If it
cannot be rotated manually, DO NOT rotate or repair it with force. Force or improper maintenance may
cause fire or explosion.
MANUAL GRIDDLE
Before operation, please read the user’s manual carefully. If the appliance has been immersed in water, please
stop using and call the technicians to check and repair or replace all the components that are immersed in the
water. Before using this appliance, please make sure that the main burner, pilot light burner and oil receiver are in
correct installation.
1.
Before igniting the pilot light, ensure there is no gas odor around the device. When first using or after
cutting off the gas supply, it may take several minutes to ignite the pilot light due to the air existing in the
pipeline or clearance of the inlet pipe.
2.
Switch on the pilot control valve by rotating it counterclockwise and ignite the pilot flame with an ignitor.
3.
Turn the knob counterclockwise to switch on the main burner valve. The main burner will be completely
opened when the angle is 90°. The firepower is adjustable according to the needs of the food by rotating the
valve.
4.
After working, rotate the knob a 90° angle clockwise to turn off the main burner. After this is completed,
cut off the gas supply.
NOTE
: Control knobs of the burners can be operated manually only. DO NOT rotate it with tools. If it
cannot be rotated manually, DO NOT rotate or repair it with force. Force or improper maintenance may
cause fire or explosion.
NOTE
: There may be some smoke at the initial startup as the result of rust prevention coatings burning off.
This is normal. Please allow at least a 15 minute burn in period before using for the first time.
DAILY INSPECTION
It is necessary to check the cooking equipment daily to avoid serious accidents. Stop using if user feels that there
are some problems in the circuit or machine. Check the condition of the machine before or after using every day.
Before using, make sure the cooking equipment is not tilted and that the control panel is intact. While using,
ensure there are no strange smells, light back, flameouts or vibrating noises and that the burner flame is normal.
