17
Figure 20
Figure 19
Figure 18
CAUTION
: Failure to follow instructions could result in serious injury�
Shut-Off the Range
1�
Turn the manual shut-off valve to the
closed position�
2�
Unplug range or disconnect power�
How to Convert Gas Pressure Regulator (Natural Gas to LP Gas)
Manual Shut-Off Valve
“Closed” Position
To Range
Gas Supply Line
b
c
a
a
d
d
e
e
e
e
1�
Remove plastic cover from gas pressure regulator cap�
2�
Turn gas pressure regulator cap counter-clockwise with a 5/8” wrench to remove�
NOTE
: DO NOT remove the spring beneath the cap�
3�
Remove the retainer pin that is currently positioned for use with Natural Gas�
4�
Turn the retainer pin upside down and re-install into the regulator cap� It is now positioned for use with LP Gas�
5�
Screw the regulator cap back into the regulator and reattach the regulator to the nipple and flare union�
How to Convert Gas Pressure Regulator (Natural Gas to LP Gas)
a�
Plastic cover
b�
Gas pressure regulator
cap with solid end
facing out
c�
Gas pressure regulator
cap with hollow end
facing out
d� Washer
e�
Gas pressure regulator
cap
Section View
Section View
1�
Remove the burner grates, burner
caps and burner heads�
2�
Using a 7 mm nut driver, remove the
burner orifices�
3�
Install the proper orifices in replace
of the ones that were removed�
4�
Re-install the burner bases, heads and
top grates� Make sure the burner caps
are properly seated on the burner
heads�
Triple Ring Burner
5 Orifices
Auxiliary Burner, Semi-Rapid Burner,
Repid Burner: 1 Orifiece Each
Orifieces
Summary of Contents for MCSRG24S
Page 20: ...20...
