To turn the control to the "OFF" position, rotate the
control knob to the "0" position. If the appliance
has been left out of use for some time, set the
control to maximum or the "7" position for 2-3
Fig A (MCWC16M)
see page 6
hours before turning to the desired position. If the
Fig B (MCWC30M)
see page 6
appliance is not being used for long time periods,
The temperature will vary depending on the
disconnect the plug and leave the door partially
with which the door is opened.
quantity of the item stored and on the frequency
open. This will help to reduce mold/mildew from
accumulating inside the appliance cabinet.
To start the appliance turn the temperature control
knob to the position corresponding to the desired
cooling.
The temperature of the appliance is controlled by setting the thermostat knob to a
desired setting.
Temperature Selection
WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO EFFECT
ON THE OPERATION OF THE APPLIANCE.
Temperature Control
5
Description of the appliance
(A) Adjustable Wire Shelves
(The number of shelves depends on the model)
Shelves can be optionally placed on the guides
inside the appliance. Perishable items should
be stored towards the back/rear of the shelves.
i.e. the coldest part of the shelf.
(B) Defrost Water Outlet
The interior of the appliance is cooled with a
cooling plate mounted in the rear wall. Under the
plate there is a channel and an outlet for defrost
water. Regularly check the defrost water outlet
and the drain channel for blockage. They should
always be kept free and clean of particles.
