9
OPERATING YOUR APPLIANCE
➢
Temperature Control Panels
Refrigerator Temperature Control
SET (ON/OFF):
This will turn off all cooling functions but not the power to the unit.
Freezer Control
➢
Setting the Temperature Control
•
Your refrigerator has one control for regulating the temperature. The temperature control is located
on the top of the refrigerator compartment. As well as a control knob in the freezer to balance the
cold air distribution between the two compartments.
•
The temperature control in the refrigerator compartment will control the actual cooling cycle
whereas the control knob in the freezer compartment will adjust the distribution of the cold air
between the freezer and the refrigerator compartments.
•
The first time you turn the unit on, adjust the temperature control knob to “COLDEST” in the freezer
compartment and “COLDEST” in the refrigerator compartment and run for at least 4 hours before
placing foods inside. This will ensure the freezer cabinet is thoroughly chilled and the refrigerator
compartment will be stabilized before food is placed. Then return selector to
“Recommended” or
COLDER
position in the freezer compartment and
“Recommended” or COLDER
in the
refrigerator compartment.
•
Adjust the temperature control to the setting that best suits your needs. The setting of
“Recommended” in the refrigerator compartment and
“COLDER”
in the freezer compartment will
distribute the cold air equally between both compartments which should be appropriate for home
or office refrigerator use.
•
If you at any time want to distribute a larger amount of cold air to the freezer for example is a large
amount of food has been added to the freezer, simply move the controller to the “COLDEST”
position until the desired temperature has been attained then return the controller to the
“Recommended”
position.
•
If you at any time want to distribute a larger amount of cold air to the refrigerator section, for example
to quickly cool down if a large amount of fresh food has been added, simply move the controller in
the freezer to the “COOL” position until the desired temperature has been attained and then return
the controller to the
“Recommended”
position.
