Magic Flight Power Up 3.0, Flight Manual

USAGE INSTRUCTIONS

To begin, set the desired 

Temperature Dial

 setting on the 

Rheostat

 at (40-50% power) approximate 

midpoint.

Plug

in

to 

your desired power source (A/C 

Wall Plug

 or 

C

ar 

A

dapter), then plug 

into the 

Barrel Receiver

.

Attach

Magnetic Connection Cord 

to the 

4-Pin Connection Point

 located at the base of the 

Rheostat

.

Fully insert the 

Banana Plug

 into the round chamber located on the side of the Launch Box or MD Box.

Press in the 

Power Button

 on the back end of the 

Rheostat

 to engage power to the Launch Box or MD 

Box. The 

In

dicator Light

 inside the Launch Box should glow and screen should heat up simultaneously 

in 3-5 seconds. (The Indicator Light is a tiny incandescent light seated below the trench

.

)

Begin to draw, a slow steady sip. If using higher heat settings (60-100% power), draw with a 

slightly quicker sip to avoid combustion.

Release the 

Power Button

 to disengage delivery of power to 

your device

.

PRO TIP: 

Designed to Launch you to the next level of purity, Magic-Flight offers a variety of        

Water Filtration Devices: UFO, BOTTLE ROCKET, or ORBITER.     

1.

2.

3.

4.

5.

6.

7.