SBACH342- 50cc
Preface:
Thank you for purchasing the Magic Flight Sbach 342- 50cc
This model was specifically designed for aerobatics and 3D flying,
based on the knowledge and experience of professional pilots
and professional developers.
The design and prototyping is “Made in Germany” the serial production is made from an asian supplier
This allows us to offer our customers the best possible quality and flying characteristics
for a very comfortable price.
We wish you much fun with the MFlight Sbach342 50cc. If you have any question
please feel free to contact us, you are every time welcome !!
Ok, lets begin !
MAGIC FLIGHT
SBACH342
50cc Assembly Manual V1.3
Liability:
We explicitly point out the improper unprofessional
and reckless handling of model airplanes, persons and
property damage can result.
You bought a kit, that you self have to build to a ready
to fly Model.
Magic Flight RC can not control assembly operation
and maintenance of the model and the used remote
control components. We emphasize, that we do not
assume any liability for the loss, damage or costs that
may arise from the use of the model aircraft.
We therefore advise you to look for help in person and
model flying clubs who have experience in handling
with model airplanes
Tips:
Before starting any work, we recommend you to iron the film.
Although the model is covered with high-quality film. However it can be,
that your new model exposed to extreme temperature fluctuations.
That can led to a wrinkling of the covering film.
Or it can lead to wrinkling, when the model shall be suspended for the
first time to intense heat or sun.
WARNING! These are not signs of a bad cover or for low grade material,
it is just a natural reaction of the film to high temperature fluctuations.
