background image

Version 1.0 

 

 

Page 4

 

4.  FOREWORD 

 
This manual describes the MAGICFX® CO2 Dominator. The information in this manual is important for 
the proper and safe functioning of the CO2 Dominator. If you are not familiar with the installation, 
operation, preventative maintenance etc. of the CO2 Dominator then please read this user manual 
carefully from beginning to end. MAGIC FX also insists that all new users (operators, installers, 
maintenance workers and cleaners) receive a training course in which this user manual can serve as a 
starting point. 
 
MAGIC FX advises that the original of this user manual, including appendices, is kept at a safe and 
central place. It is best that another original or copy is kept close to the CO2 Dominator at the 
workplace.  
 
If you are familiar with these matters, then you can use this manual as a work of reference. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The following standard markings are used in this manual for drawing attention to certain subjects or 
actions. 
 

 

 

 

 
TIP: 
Gives you suggestions and advice regarding easier or more 
convenient ways to carry out certain tasks. 
 
 

 

 

 

 
PLEASE NOTE: 
A comment with additional information: alerts you to certain problems. 
 

 

 

 

 
CAUTION: 
The machine can be damaged if you do not follow the procedures 
carefully. 
 

 

 

 

 
DANGER WARNING: 
You can get (seriously) hurt if you do not carefully carry out the 
procedures. 
 

Summary of Contents for MFX1150






















Reviews: