-5-
Feature of Dehydrator
This unit features an automatic fan, which circulates warm air producing a nice evenly dried device!
Dried foods are a great treat to snack on because they hold almost all of their nutritional value and flavor.
· Perfect way to preserve fruit, snacks, vegetables, bread, flowers and more.
· With t
en stainless steel tray, each tray can’t over 0.6kgs food
· If you want to dry thicker food, you can take out one tray to make the height higher between two trays.
· Put the Non-stick sheet on bottom can collect the residue during dry food
· From the transparent window, you can see the food situation during drying.
Before Use:
Cleaning:
Before using the first time, wipe all parts of the appliance. Clean the 6 trays, and mesh, on-stick sheet
with a lightly moistened cloth.
Use detergent as needed. Don't put the main engine into water or other liquids!
After cleaning the unit must be run in for 30 minutes without placing any food for drying during this period.
Any smoke or smells produced during this procedure are normal. Please ensure sufficient
ventilation.
After the running in period, rinse the racks in water and dry all parts. This act is only
necessary for the first time.
Unplug the dehydrator from the power supply and let it cool down before cleaning. Use a soft brush to
remove food sticking. Dry all parts before storing the dehydrator.
Do not clean the appliance with aggressive chemicals or abrasives in order not to damage the surface.
Assembling the appliance:
Make sure that the dehydrator sits steadily on a solid level surface. Stock the drying trays and connect
the plug with a wall socket. The dehydrator is now ready for use.
Usage Method
1. Put the clean food in the trays
– Do not overload the trays and never overlap the food. Close the
damper door.
2. Plug dehydrator into wall outlet, the screen and button light up and there is a beep sound at the
beginning when it starts up. And the ON/OFF” light up, the screen shows “---“.
3.
Press the “ON/OFF” button, The LED screen will show default time setting “10:00” and temp setting
