OPERATING INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Before first use, wash all attachments in warm soapy
water and dry with a clean dry cloth.
1. At least ⅓ of the total capacity of the Urn should be filled with cool water.
2. Cover the unit with the Lid.
3. Plug the Power Cord into electric outlet properly.
4. Double Switch: Boiling Mode –Use switch marked "Boil" To boil the
water, put the Double Switches marked “boil” and “keep warm” in ON
position; both lights will go on thus activating the heating elements. Once
the water has finished boiling (approximately 30 minutes), the boiling
element will automatically shut off. The Indicator Light will light up. If
the water is detected to be cool, the re-boil will begin only if both “keep
warm” and “boil” modes are on.
5. Double Switch: Keep Warm Mode - Use switch marked "Keep Warm".
To boil the water, put the Double Switches marked "boil" and "keep warm"
in ON position; both lights will go on thus activating the heating elements.
Once the water has finished boiling (approximately 30 minutes), the
Indicator Light will light up. The "boil" switch should be turned off but
"keep warm" switch should remain on.
CAUTION: Do not touch the outside of the appliance during use! IT IS HOT!!!
pg 3
