9
4. ACTIVATION, UPDATE AND GAMEPLAY
IMPORTANT!
DEVICE SOFTWARE IS COPYRIGHT PROTECTED. COPYING AND DISTRIBUTION IS
STRICTLY PROHIBITED. IT IS ALSO FORBIDDEN TO INTERFERE IN THE INTEGRITY OF
SOFTWARE THROUGH MODIFICATION OR IMPLEMENTATION OF ANY CHANGES
WITHOUT APPROVAL OF THE MANUFACTURER. ANY ATTEMPTS OF SOFTWARE
CHANGES, OTHER THAN THOSE SPECIFIED BY THE MANUFACTURER MAY RESULT IN
WARRANTY LOSS.
4.1 ACTIVATION
Game software is USB license dongle protected. Each unit is equiped with one
dongle.
4.2.1 SOFTWARE UPDATE FOR CPU BOARD V2
To carry out software upgrade memory stick and USB computer
mouse is required.
1. Download .apk file provided by manufacturer/distributor and
save it to a memory stick.
2. Open the lower rear service door and locate the CPU board
(see picture)
3. Connect the memory stick and a computer mouse in free USB
ports. Disconnect one of USB plugs if not enought USB ports are
available. Remember to plug it back after update process!
4. Leave the Drifty Chase application by clicking the right mouse
button. Tip: Game will probably exit after disconnecting one of
USB plugs in 3rd step.
5. Go to application list in
bottom center of the screen
6. Click on FILE MANAGER
app
7. Click on 3 parallel lines in
left top corner to see disks
listing
8. Select your USB storage
from list
12. At finish - disconnect USB
mouse and flash
drive, connect disconnected
USB plugs in 3rd step and
replug the machine. Done!
9. Locate and click the
downloaded .apk file
10. Click INSTALL in the right
bottom corner of the screen
11. Wait for installation
complete. It may take a while.
