Maintenance
Fan Filter
Cautions:
Start work after ensuring that the power has been turned
off.
Replace the fan filter with a new one after using it for
about one year. For details on its replacement, please
consult our authorized dealers.
1
Remove the filter cover at the back of the laminator
INLET
OPTION
2
Remove the fan filter
3
Remove any dirt that is attached to the fan filter
using a vacuum cleaner
Cautions:
Hold down the fan filter to avoid it from been sucked into
the vacuum cleaner.
●
●
●
4
Set the fan filter
5
Set the filter cover
INLET
OPTION
Film Cassette
Due to the characteristics of the patch film, residues at the
back of the laminate film may be attached to the film guide
of the film cassette. Residues on the adhesive face of the
laminate film may result in poor adhesion. When replacing
the laminate film, check to ensure that no residues are
attached to the film guides.
Cautions:
If the security lock of the card printer is on, deactivate it.
After work is complete, activate the security lock again.
For details on locking/unlocking the security lock, refer to
the manual of the card printer.
Stand the film cassette on a flat surface. Avoid doing so
on a floor as dust attached to the film may cause poor
adhesion or malfunction.
A film cassette that has laminate film attached on it is
heavy. Hold the film cassette with both hands to avoid
dropping when working with it.
1
Open the laminator door
●
●
●
●
