Before Use
Right
A
B
C
D
Card feed port
Feeds the printed card from the card printer that is
connected to the laminator.
Infrared window
Sends or receives data via infrared communication by
connecting with the card printer.
Filter cover
Remove when you want to exchange the filter.
When moving the laminator, do not carry it at the filter
cover.
D
Handle
Hold this area when moving the laminator.
Left
A
C
B
D
Card outlet
Discharges the cards.
Card stacker attachment slot
For attaching the card stacker supplied with the card printer.
Filter cover
Remove when you want to exchange the filter.
When moving the laminator, do not carry it at the filter
cover.
D
Handle
Hold this area when moving the laminator.
A
●
B
●
C
●
●
●
A
●
B
●
C
●
●
●
When Laminator Door is Open
B
E
D
C
A
Cassette buttons
Press the buttons to remove the film cassette.
Top side film cassette (orange)
For attaching the laminate film.
Jog dial attachment slot
For discharging the card during a card jam by attaching
the jog dial supplied with the card printer to the card feed
roller and turning it.
Bottom side film cassette (yellowish-green)
For attaching the laminate film.
Jog dial attachment slot
Enables attachment of a supplied jog dial to the card
printer.
Film Cassette
B
A
A
B
A
A
C
D
D
C
Top Side Film Cassette Bottom Side Film Cassette
Guide shaft
Provides guide to the position for attaching the film cassette.
Film Guides
When attaching the laminate film, unwind it along the shafts.
Bobbin holder
For securing the take-up side of the laminate film.
Bobbin holder (patch position adjustment
mechanism attached)
For securing the supply side of the laminate film.
It can also be used to adjust the patch position in the front
back direction.
A
●
B
●
C
●
D
●
E
●
A
●
B
●
C
●
D
●
●
