Card Feed Roller/Heating Roller
v
The color of the printed card may appear faded or dirt may appear
conspicuous if the card feed roller or heating roller is dirty.
v
Perform cleaning after printing about 1,000 cards.
Cautions:
v
If the security lock is on, deactivate it. After work is complete,
activate the security lock again.
v
Before cleaning the card feed roller and heating roller, make sure
that you clean the cleaning roller. Otherwise, dirt on the cleaning
roller may be attached to the cleaning card, causing its cleaning
capability to deteriorate.
v
Stand the cassette on a flat surface as illustrated in the diagram.
Avoid doing so on the floor as dust attached to it may cause printing
errors.
.
v
If card jam occurs when the cleaning card is inserted, turn off and on
the power of the printer. Doing so automatically discharges the card.
v
Do not perform any work on the printer door. Do not place heavy
objects or apply load on the printer. Doing so may damage it.
v
Each cleaning card can only be used once. Reusing a dirty card may
dirty the roller or cause the printer to malfunction.
v
After cleaning is complete, check to ensure that all dismantled parts
are restored to their original positions. Failure to restore the parts
may result in malfunction of the printer.
v
For details on separately sold items, please consult our authorized
dealers.
1
Open the printer door. Press and hold down the cassette button,
and remove the retransfer film cassette (on the left)
.
.
2
Close the printer door
3
Remove the card hopper
.
4
Turn on the power
.
5
Press
I
to set to [Cleaning]
.
6
Press
G
to set to [Rollers]
.
7
Press
B
v
A [Film Checking..] message appears, followed by a [Cleaning Start
OK?] message.
.
8
Peel off the backing paper from the cleaning card (sold separately)
.
Maintenance
37
