Disclaimer
.
Name and Functions of Parts
Internal Mechanism Diagram
.
A
Card feeder unit
v
This is the roller for feeding cards.
B
Bend remedy unit (optional)
v
Corrects bending of the card after retransfer.
C
Retransfer heating roller
v
Transfers images printed on the retransfer film to the card.
D
Non-contact IC encoder (optional)
v
Writes data to a non-contact IC card.
E
Contact section of contact IC encoder (optional)
v
Writes data to a contact IC card.
F
Magnetic encoder (optional)
v
Writes data to a magnetic stripe card.
G
Card turn over unit (double-sided printer only)
v
Inverts the card.
H
Cleaning roller
v
Removes dust or dirt attached to the card.
I
Card hopper
v
For loading cards.
J
Retransfer film (take-up side)
v
For attaching the take-up side of the retransfer film.
K
Retransfer film (supply side)
v
For attaching the unused side of the retransfer film.
L
Ink ribbon (take-up side)
v
For attaching the take-up side of the ink ribbon.
M
Thermal head
v
Prints images on the retransfer film.
N
Ink ribbon (supply side)
v
For attaching the unused side of the ink ribbon.
O
NG card outlet
v
Discharges NG cards, such as during card jams.
P
Card load roller
v
Roller for loading cards.
Before Use
7
