20
4.
Use the ‘S’ and ‘-
Station’ buttons to scroll to the
display language you would like.
Press and release the ‘Select’
button.
Note:
As soon as you select a
different display language, all of the
display information will be in this
new language.
5.
Press and hold the ‘Info/Menu’
button to return to the station
display.
Software version
You can check the software
version of your radio.
1.
Press and hold the ‘Info/Menu’
button on the top of your radio.
2.
Use the ‘S’ and ‘-
Station’ buttons to scroll to
<System>. Press and release the
‘Select’ button.
3.
Use the ‘S’ and ‘-
Station’ buttons to scroll to <SW
version>. Press and release the
‘Select’ button.
4.
The software version will be
displayed and you may wish to
make a note of it here:
.................................................
5.
Press and hold the ‘Info/Menu’
button to return to the station
display.
Factory reset
You can reset your radio and
restore all of the original factory
settings.
Note:
If you reset your radio
all of your DAB+ and FM station
presets will be deleted.
1.
Press and hold the ‘Info/Menu’
button on the top of your radio.
2.
Use the ‘S’ and ‘-
Station’ buttons to scroll to
<System>. Press and release the
‘Select’ button.
3.
Use the ‘S’ and ‘-
Station’ buttons to scroll to
<Factory Reset>. Press and
release the ‘Select’ button.
4.
‘Factory Reset? <No> Yes’ will
be displayed. Use the ‘S’
and ‘- Station’ buttons to scroll
to ‘<Yes>’. Press and release the
³7IPIGX´FYXXSRXSGSR½VQ
5.
‘Restarting...’ is displayed. After
a few seconds the display will
change to ‘Welcome to Digital
Radio’ and will then go to Standby.
6.
Press and hold the ‘Power’
button on the top of the radio
and your radio will switch on
and scan for DAB+ stations.
Remember to extend the
telescopic aerial.
