Version 1.1
Page 18
13. TROUBLESHOOTING
-
The CO2 Dominator is leaking
Check if all hoses are connected well and tightly to the CO2 bottles, distribution block and to the CO2
Dominator. If a connector is leaking, try to adapt it more tightly.
-
The CO2 Dominator does not produce white smoke plumes.
Probably u are not using the right CO
2
cylinder. Connect a cylinder with liquid carbon dioxide equipped
with a dip pipe to the CO2 Dominator.
In rare cases the dip pipe can be broken. Replace the cylinder and notify your gas supplier about the
defect.
-
The CO2 Dominator still does not work after troubleshooting
Always contact your dealer or the MAGIC FX technical department if you have any doubts or
questions about the operation of or other issues related to the CO2 Dominator.
14. TECHNICAL SPECIFICATIONS
Dimensions
and weight
Length:
350mm (13.8”)
Width:
350mm
(13.8”)
Height:
150mm (5.9”)
Weight:
18 Kg (39.7lbs.)
Power
Input:
AC 230V~50-60Hz
Output:
125W
Consumption: 5A 250V 5x20mm
Fuse:
AC 230V~50-60Hz
DMX
Input:
3 pin Neutrik XLR Male Socket
Output:
3 pin Neutrik XLR Female Socket
CO
2
Input:
Liquid CO
2
Output:
CO
2
Gas
Consumption: 0,5 Kg/s (1.1 lbs/s)
15. MAINTENANCE
To prolong the life of the CO2 Dominator for as long as possible, you must regularly clean it and test
that it functions properly.
Regardless of the reason, contact MAGIC FX if the CO2 Dominator does not work properly
DANGER WARNING:
Never replace parts yourself. Always consult MAGIC FX when needed.
16. GUARANTEE
The MAGIC FX CO2 Dominator has a 3 years factory guarantee.
The guarantee is annulled should the CO2 Dominator be used for purposes other than intended or for
applications that are not listed in the manual.
The guarantee is annulled should the device be used incorrectly or in a manner contrary to its
instructions.
The guarantee is annulled if the device is altered without the permission of its supplier.
