background image

8  MAGICFX

®

 ECO2JET 

 

User and Installation Manual

SAFETY

The CO2 SWITCH has been designed and constructed in such a manner that it can 
be used safely. This applies to the use, the circumstances and the regulations as 
described in this documentation. Reading this documentation and following the 
instructions are therefore necessary for everyone who is authorised to work with the 
CO2 SWITCH.

The CO2 SWITCH must be used in surroundings that:

•  Have a stable temperature of between -20 and 70 °C.
•  Have a relative humidity degree between 20 % and 90 % (non condensing).
•  Are free of dust, corrosive gases and high concentrations of organic vapours.
•  Are not situated in the vicinity of a source of vibration.

2.1 

GENERAL SAFETY RULES

•  Only authorised persons may carry out work with the CO2 SWITCH.
•  Do not use the CO2 SWITCH if there are people or animals in the direct output.
•  Make sure that children, unauthorised people and animals do not obtain 

access to the CO2 SWITCH.

•  Do not connect more units to a single electrical circuit than the installed fuse 

is able to handle. (Calculate the summed load with the electrical data from 
Chapter 1)

•  Do not remove any safeguards, safety caps and safety symbols.
•  All required safety devices must be in good condition and function properly.
• 

Ensure sufficient lighting of the surroundings.

•  Keep the workplace clean.

2.2 

CO

2

The MAGICFX® CO2 SWITCH uses liquid CO

2

 as input. The application of CO

2

 involves 

serious risks. Make sure that you are well informed on these risks before installation 
and/or operation. Always use approved CO

2

 cylinders, hoses and connections. 

Always consult your CO

2

 supplier for regulations and instructions on safe installation 

and use.

MAGIC FX is not liable for unsafe situations, accidents and damage that are the result 
of incorrect working with CO

2

 and CO

2

 cylinders.

WARNING

Inadequate installation and/or operation of a CO

2

 powered 

machine and CO

2

 cylinders can lead to death or serious injury. 

Always follow the instructions from this manual, from your CO

2

 

supplier and from local authorities.

Summary of Contents for CO2 Dominator





















Reviews: