Magicfx MFX0408 User And Installation Manual Download

Page: 10 / 40

10 MAGICFX

STADIUMSHOT III

—

User and Installation Manual

Menu function

Explanation

Lock/Unlock

Controller

Holding the Lock button for more than 5 seconds will “lock” the

display functions. Meaning buttons will not respond. This to avoid

accidental change of parameters via display.To unlock, hold the

Unlock button for more than 5 seconds.

Reset Errors

In case there is a locking error present, this button will reset the

appliance. If the fault does not persist, the locking error will not

reappear.

DMX Start

Address (1-512)

Setting the DMX start address. DMX Enable Address (1-512)

Setting the DMX Enable Address. DMX Footprint This parameter

indicates the DMX footprint, in other words the amount of

sequential channels used by the appliance. This does not

include the enable channel.

RDM (On/Off)

Use this function to turn on/off the RDM functionality.

Pressure

(4-8 Bar)

Use this function to set the pressure between 4 and 8 bar.

Pyro Input

Control (On/Off)

Use this function to switch between the powered control modes

DMX and pyro.

Display Dimmer

(On/Off)

Turn display dimmer on or off. If turned on, the display is dimmed

automatically 30 seconds after the last button push.

Factory Defaults

(Yes/No)

Restores the appliance factory default settings.

Type

(Alarm/Error)

Toggle between the occurred locking error (Alarm) list, and

blocking error (Error) list. Locking errors need intervention by

user, although they are “auto-reset” 3 times before the appliance

remains in error until reset by user. Blocking errors clear when the

triggering fault disappears. 16 locked, and 16 blocked errors are

logged. Top of the list shows the last occurring error.

Serial Number

(DDDDD)

Appliance serial number as also printed on the appliance label.

Unique ID

(HHHHHHHHHHHH)

UID number as the appliance appears in the RDM device list

after running discovery.

Software Version Installed software version.
Software CRC

CRC of the functional software.

Bootloader CRC

CRC of the bootloader software.

Build Date

Release date of functional software.

Up-Time

(DDDD:HH:MM:SS)

Time counter which indicates how long the appliance has been

powered in total.

Shots Fired

Number of shots fired with DMX.

Pump Time

(DDDD:HH:MM:SS)

Time counter which indicates how long the pump has been on

in total.

Menu functions

Summary of Contents for MFX0408









































Search results

Summary of Contents for MFX0408

Reviews:

Related manuals for MFX0408

Brands by name

Popular brands

Magicfx MFX0408, User And Installation Manual

Search results

Summary of Contents for MFX0408

Reviews:

Related manuals for MFX0408

Brands by name

Popular brands