Version 1.0
Page 8
6. SAFETY
6.1
INTRODUCTION
The Shot Base Wireless has been designed and constructed in such a manner that it can be used
safely. This applies to the use, the circumstances and the regulations as described in this
documentation. Reading this documentation and following the instructions are therefore necessary for
everyone who is authorised to work with the Shot Base Wireless.
The Shot Base Wireless must be placed and used in surroundings that preferably:
-
Have a reasonably stable temperature of between 0 and 30ºC.
-
Have a relative humidity degree of no more than 75%.
-
Are reasonably free of dust, corrosive gases and high concentrations of organic vapours.
6.2
GENERAL SAFETY RULES
-
Only use the Shot Base Wireless if there are no people, animals or other objects in the direction of
the electric cannon within the output distance. The shooting direction is the direction in which the
electric cannon in the Shot Base Wireless is pointed. The output distance depends on the content
and length of the electric cannons.
-
Make sure that children, unauthorised people and animals do not obtain access to the Shot Base
Wireless!
-
Do not take hold of the Shot Base Wireless while it is working or is switched on. Also, when the
Shot Base Wireless is not working, the electric cannon may still be filled.
-
Safety devices may not be removed or disabled.
-
All required safety devices must be in good condition and function properly.
-
Ensure sufficient lighting of the surroundings.
-
Keep the workplace clean.
-
Only authorised persons may carry out work with the Shot Base Wireless.
6.3
WARNINGS
Warning texts have been attached to the Shot Base Wireless. With regard to these the following rules
apply:
-
These texts may not be removed or damaged. The operator must regularly check if this is the
case.
-
The operator must ensure that the texts are and remain clearly visible and legible.
DANGER WARNING:
One must replace texts or signs if these are absent, damaged or
illegible.
