background image

Accessories

MKGD Series Gas Griddle

L25-054 Rev. 1 (01/12)

16

6.  Accessories

6.1. Standard

All plain steel and chrome plated griddles are shipped with a set of 4” adjustable legs. The appliance
also comes equipped from the factory with a manual gas shutoff valve, and the specified gas regulator
for the model and gas type purchased.

Each MKG Chrome surfaced griddle is equipped with a Chrome Kit which includes a cleaning brush,
cleaning powder, spatula, scraper, and scraper blade replacements. See the table below for Re-Order
Part Nos.

Using MagiKitch'n chrome griddle accessories are

important to maintaining the life of the griddle's chrome

surface

6.2. Optional

To order accessories for your griddle, call your local MagiKitch’n dealer for prices and availability.
The list of available accessories for your new appliance will give you the flexibility to customize your
griddle to the best fit for your operational requirements.

This section will show you a variety of front and rear work shelves, cutting boards, equipment stands, and
other accessories to provide you with an efficient working appliance.

6.2.1.  Service Shelves, Front

* 10” and 12” service shelves are also available with pan cutouts. Consult factory for sizes and
availability.

Chrome Griddle Accessories

Magi Kleans'r

Part No. 9825-1525101

Palmetto Brush

Part No. 9825-1524901

Spatula, (Chrome Surface)

Part No. 9825-1525001

Scraper, (W/ Blade and Cover

Part No. 9825-1528001

Replacement Blades

Part No. 9825-1528002

Shelf Model

MKG24

MKG36

MKG48

MKG60

MKG72

8" Service Shelf, W/O Towel Bar

5125-1511601-C 5125-1511602-C 5125-1511603-C 5125-1511610-C 5125-1511611-C

*10" Service Shelf, W/O Towel Bar 5125-1511604-C 5125-1511605-C 5125-1511606-C 5125-1511612-C 5125-1511613-C
*12" Service Shelf, W/O Towel Bar 5125-1511607-C 5125-1511608-C 5125-1511609-C 5125-1511614-C 5125-1511615-C

8" Service Shelf, W/ Towel Bar

5125-1511701-C 5125-1511702-C 5125-1511703-C 5125-1511710-C 5125-1511711-C

*10" Service Shelf, W/ Towel Bar

5125-1511704-C 5125-1511705-C 5125-1511706-C 5125-1511712-C 5125-1511713-C

*12" Service Shelf, W/ Towel Bar

5125-1511707-C 5125-1511708-C 5125-1511709-C 5125-1511714-C 5125-1511715-C

Towel Bar Only

5125-1511801-C 5125-1511802-C 5125-1511803-C 5125-151804-C 5125-1511805-C

Summary of Contents for MKGD24























Reviews: