L25-001 REV 1 (11/02)
SMB 600 Series Models
without safety pilot
a.) Turn all burners to OFF.
b.) Remove the top grid(s).
d.) Turn the runner tube valve to ON.
e.) Light the runner tube through the gap in the front of the coal support as shown.
Note: If the runner tube does not light, wait a few seconds, then try again.
f.) Replace the top grid(s).
Push and turn the burner valves to operate the individual burners as needed.
g.) If any burner fails to light from the runner tube, shut off all the burners and the runner
tube. Do not attempt to re-light for five minutes after shutdown. Repeat steps a thru f.
If unit still fails to operate properly, contact authorized service personnel.
Broiler Shut Down
Turn all burners to OFF.
Turn the runner tube valve to OFF.
