background image

User manual

26

v.201808

www.magiline.fr

XVI. SYSTEM

This menu groups the different settings of your iMAGI control panel
     • Date

     • Time
     • Screen adjustment

     • Language setting (2 choices)
     • Information (about the installed software version)

1. DATE

This menu allows you to set the current date in your iMAGI package.

Pressing this key increases the date by one day

Pressing this key increases the date by one 

month

Pressing this key increases the date by one 

year

+

+

+

1

January

2030

-

-

-

Pressing this key decreases the date by one 

day

Pressing this key decreases the date by one 

month

Pressing this key decreases the date by one 

year

After making changes in this menu, press the execute key  

  to confirm your choice or the cancel key 

 to cancel 

and return to the previous menu.

2. TIME

This menu allows you to set the time of your iMAGI package.

Pressing this key increases the time

Pressing this key increases the minutes

+

+

1

H :

00

-

-

Pressing this key decreases the time

Pressing this key decreases the minutes

After making changes in this menu, press the execute key  

  to confirm your choice or the cancel key 

 to cancel 

and return to the previous menu.

Summary of Contents for iMAGI+ Premium



































Reviews: