6
FITTING THE BOWL
1. Place the bowl on the motor unit with the
handle to the left hand side.
3. Place the chosen accessory in the bowl
(see details on following page).
5. Turn the lid in an anti-clockwise
direction until the locking device clicks
into position at the top of the handle.
The safety rod is now in contact with the
motor.
4. Position the lid, completely flat, by
placing the feed tube to the left of the
handle.
2. Turn the bowl anti-clockwise as far as
it will go making sure it firmly locks into
position. The handle will now be at the
centre of the motor unit.
The Mini Plus is now ready to use.
IMPORTANT
If the lid is not properly locked into
position or if it is opened during
preparation, the appliance will
cease to function, even if the “ON”
switch has been pressed.