SETTING UP AND USING THE APPLIANCE
Before plugging in the appliance, check that the voltage indicated on the
appliance corresponds to your mains supply.
1. Only use the Slicer when the tray (2) and the food grip (5) are in position.
2. Place the food to be sliced on the tray, pressing it against the back plate (4).
3. Adjust the thickness by turning the thickness adjuster knob (7).
4. Hold the food in place and switch the appliance on, using the on/off switch (8)
located at the back of the appliance.
5. Slide the tray (2) backwards and forwards along the slicer base(3).
6. Check that the first slice is the right thickness. If necessary, alter the setting
using the adjuster knob (7).
7. This appliance is guaranteed for 1 year from date of purchase and is not
guaranteed for commercial use.
To collect the slices more easily, place a flat plate behind the appliance, between
the on/off switch and the adjuster knob. This way, the slices will fall directly onto
the plate as you cut them.
REMOVING THE TRAY
To remove the tray, slide it towards the left as far as it will go. Raise the plastic tab
situated underneath the tray, at the lowest end. Pull the tray free from the slide.
To replace the tray, insert the two plastic tabs into the slide, underneath the slicer
base. Slide the tray towards the right, then raise the tab at the lowest end to lock it
into position.
7
SAFETY ADVICE
Always follow these safety instructions
• Never immerse the appliance in water.
• Never leave the appliance within reach of children and never let them use it.
• Never touch the blade while the Slicer is in operation.
• Always place the appliance on a flat surface.
• Use the food grip for small quantities of food.
• Unplug the appliance before cleaning and each time after use.
• Never pour water onto the appliance.
• After each use, return the back plate to position "O", in line with the blade.
• If the appliance is dropped or the cord damaged, make sure it is checked by a
specialist.
• The blade is extremely sharp. Handle it with care.
• If the appliance fails to operate correctly, take it to a Magimix approved after-
sales service agent.
