Projector
37
.English.
Source
This menu allows you to specify the signal source that you wish to project. This is
particularly useful if you have several sources (video and/or computer) connected to
your projector.
Changing settings procedure (using either the Projector Control Panel or the
Remote Control):
1. Press the MENU button to display OSD menu.
2. Press the or button to select Source menu.
3. To enter the sub-menu setting, press the button.
4. Press the or button to select the desired input source.
5. Press the button to confirm the input selection.
On the Auto Source sub-menus, press the or button to select the desired
setting.
6. To exit from the current menu, toggle the MENU button.