11
4.4. Rear view
4.5. Installation of accessories
The operating elements on the rear of the camera are covered in order to
waterproof the camera. The cover can be removed by slightly twisting and
simultaneous pulling the provided metal ring. To replace the cover, apply
and push down evenly into the recess until flush with the housing wall.
Note:
• Prior to underwater use ensure that the cover has been applied and is
seated correctly.
• Take care that the seal around the cover is not damaged.
USB port
Waterproof cover
microSD card
slot
TV-out port
Microphone hole /
Reset port
Charging indicator
with closed cover