12
Using the supplied fixings, the video camera can
be secured to a support, such as the handlebars
of a bicycle, to a crash helmet or other sports
equipment.
Open the bicycle holder by partially releasing the
securing nuts and pushing the bolt to the side.
Open the bicycle holder, place it on the support,
close the bracket again and tighten the securing
nut again until the stand is firmly secured.
You can now slide the video camera with the
fixing on its base onto the bicycle holder. Slide on
the camera until it engages. To remove the camera
again, push on the lever between the camera and
the bicycle holder at the back of the camera and
then slide the camera to the front and away from
the holder.
The helmet mount allows the camera to be
attached to skiing and cycle helmets but also to
other surfaces, such as surfboards. Using one of
the adhesive pads (several times reusable), stick
the helmet mount onto a cleaned section of the
surface. Using one of the fixing screws, attach the
retaining clip to the helmet mount. The extension
can be inserted between the helmet mount
and the retaining clip to increase the height of
the camera and provide additional freedom of
movement.
Lastly, place the camera onto the retaining clip
until it clicks into place. You can now adjust the
fixings before tightening the fixing screws.
Bicycle holder
Helmet holder
Self adhesive pad´s
Holder clip and
extension
