Preparing the quadrocopter
19
Preparing the quadrocopter
Inserting the batteries in the remote
control
To insert batteries
3
into the remote control
2
, first open
the remote control
2
. The battery compartment is located
on the back of the remote control
25
. Now open the battery
compartment cover by first unscrewing the screw with the
screwdriver
9
, then pulling the clamp on the top slightly
inwards and then lifting off the cover.
First remove any existing batteries from the battery
compartment. Insert 3 fully charged batteries
3
. When
inserting batteries
3
make sure they have the correct
polarity, which is marked for each battery in the battery
compartment
25
.
Close battery compartment
25
again with protective cover.