7
Injuries and material damage
Only place camcorder on sturdy surfaces.
The camcorder could otherwise fall or topple over, causing damage or injury.
Do not operate camcorder whilst running or driving.
You could fall or cause a traffic accident.
Only use USB power adaptor specified for the camcorder.
No liability shall be accepted for damage caused by the use
of an incorrect USB power adaptor.
The 230V socket used for the power supply
must be accessible at all times so that the power supply can be quickly
disconnected from the mains if necessary.
Ensure adequate ventilation and do not cover the power supply (not supplied) to prevent overheating.
Do not place any open ignition sources, such as lit candles onto or close to the device.
Ensure that the
LCD monitor is not exposed to impacts or concentrated pressure.
This can damage the glass of the
monitor or liquid can escape from inside the camera. In case of the liquid coming into contact with the eyes or skin, rinse
immediately with clear water. In case of contact with the eyes obtain medical treatment immediately.
Damage to the electronics, display or lens caused by
external influences,
such as electric shocks, falls or others are not
covered by the warranty and shall thus be charged for.
Do not activate flash close to other persons’ eyes,
as this could damage eyes.
Do not drop or bump camcorder
and always handle with due care as the camcorder could otherwise be damaged.
