12
1.
Remove the kettle
from the base.
2. Press the cover open button.
3.
Fill the kettle
with water up to the MAX mark.
4. Close the lid by pressing it until you hear a click.
5.
Place the kettle
on the base.
6. Connect the unit to the power outlet.
7. Set the on/off button to position (I) by pressing it.
8. Wait for the water to boil and the kettle will automatically turn off.
9. Drain the water and repeat the above procedure two more times.
1. Remove the kettle from the base.
2. Press the cover open button.
3. Fill the kettle with water no lower than the MIN mark and no higher than the MAX mark.
4. Close the lid by pressing it until you hear a click.
5. Place the kettle on the base.
6. Connect the unit to the power outlet.
7. Set the on/off button to position (I) by pressing it.
8. Wait for the water to boil and the kettle will automatically turn off.
»
Do not fill the kettle below the MIN mark and above the MAX mark.
Summary of Contents for MG-106
