Magio MG-131, Manual

DEAR CUSTOMER! 

The staff of the company “Magio” thanks you for the choice you 

have made in favor of the products of our brand and guarantees 

a high quality of working of the purchased items if you follow the 

manual.  Before  using  electrical  appliances,  carefully  read  this 

manual which contains important information regarding care and 

operation for your safety.

CONTENTS OF BOX

• Iron

• A glass for water

• Instruction

• Warranty card

SAFETY INFORMATION

Read this instruction manual carefully before using the unit and 

keep  it  for  the  whole  operation  period.  Use  the  unit  for  its 

intended purpose only, as specified in this manual. Mishandling 

of the unit may lead to its breakage and cause harm to the user 

or damage to his/her property. To avoid the risk of fire, electric 

shock  and  to  prevent  injury,  observe  the  following  safety 

measures: 

• Read all instructions before use or cleaning.

• Before connecting the unit to the mains, make sure that the 

voltage specified on the unit corresponds to your home mains 

voltage. 

• Close supervision is necessary when any appliance is used 

near children. 

• Do not immerse cord, plug, or any part of the appliance in 

water or other liquids. 

• Do not let cord hang over edge of table or counter, or touch 

hot surfaces. 

• Do not operate appliance with damaged cord or plug or after 

the appliance malfunctions, or has been damaged in any 

manner. If the appliance is damaged or broken, do not repair 

yourself.

• If the power cord or the plug is broken or damaged, do not 

repair or change yourself, please send the appliance to 

qualified service center for repair or service. 

• When unplugging the unit, pull the plug but not cord.

• Do not touch the plug or the body of the appliance with wet 

hands.

• To prevent the risk of electric shock, do not use the appliance 

outdoors.

• Do not cover any part of the appliance with metal or cloth, it 

may cause overheating.

• Do not use the unit near heat sources or open flame.

• Do not use any accessories other than manufacturer 

recommended accessories. 

• Do not immerse the unit body into water or any other liquids.

• Clean the appliance regularly.

• Close supervision is necessary when children or disabled 

persons are near the operating unit.

• This appliance can be used by children aged 8 years and over 

and persons with limited physical, sensory or mental 

capabilities if supervised or given instructions on how to use the 

appliance in a safe way, and the hazards are explained. 

Children do not have to play with the device. Cleaning and 

maintenance are not performed by children without supervision.

• Regularly check the power plug and power cord integrity for 

damages.

• Never use the unit if the power cord or the power plug is 

damaged, if the unit works improperly or after it was dropped.

• Do not attempt to repair the unit. Do not disassemble the unit 

by yourself, if any malfunction is detected or after it was 

dropped, unplug the unit and apply to any authorized service 

center from the contact address list given in the warranty 

certificate and on the website www.magio.ua.

• For environment protection do not throw out the unit with 

usual household waste after its service life expiration; apply to 

the specialized center for further recycling.

• Keep the unit out of reach of children and disabled persons.

• Do not use this appliance for any use other than its intended 

use. This appliance is for household use only. 

• Never leave the appliance unattended in working. 

• Protect the device from the effects of adverse climatic 

conditions, humidity and heat sources.

• Before putting the appliance for long-time storage or before 

cleaning. Plug it off an outlet and let the appliance cool down.

• Do not leave the device unattended when it is switched on.

• When filling the tank with water, always disconnect it from the 

mains.

• During the ironing process, do not open holes to fill water.

• The iron should be used and stored on wide sustainable 

surfaces.

• When installing the iron on the stand, make sure that the 

stand is installed on a sustainable surface.

• The iron should not be used if it is dropped, if there are visible 

signs of damage or if the iron leaks.

• The iron together with the cord should be kept in a place not 

accessible to children under the age of 8 if it is under voltage or 

cooled.

• Use the iron on an even and stable surface.

• Avoid contact with skin open areas with hot surfaces of the 

iron or a steam outlet to avoid burns.

• Before removing the iron, drain the remaining water and allow 

it to cool completely.

• To avoid overloading the electrical power supply, do not switch 

on multiple power supplies at the same time.

• Do not use the appliance near baths, sinks or other containers 

filled with water.

• If the appliance falls to the water, immediately disconnect it 

from the mains. In this case, do not immerse your hands in 

water. Before using the appliance further, it must be checked by 

a qualified technician.

• The appliance can only be switched on to a grounded 

network. Do not use non-standard power supplies or other 

connecting devices.

• Before using the extension cord, make sure it is grounded.

• Do not touch hot surfaces of the iron. Use the knob and 

buttons.

• To pour water into the iron, unplug it.

• Never leave your iron lying on the ironing board. Always place 

it vertically on the heel-reliance, even if you do break between 

the ironing.

• Hot steam is dangerous. Do not direct steam at people.

• Do not iron or steam clothes worn on the person.

• Do not pour vinegar or liquid against the scum in the water 

tank.

• Avoid contacts between the soleplate and sharp metal 

surfaces that will prevent scratches on the bottom and prolong 

its service life.

• Before you pack the appliance let it cool completely in the 

vertical position.

UNPACKING 

After unit transportation or storage at low temperature keep it for 

at least three hours at room temperature before switching on.

– Unpack the unit completely and remove any stickers and 

packaging materials that can prevent unit operation.

– Check the unit for damages; do not use it in case of 

damages.

– Before switching the unit on, make sure that your home 

mains voltage corresponds to the unit operating voltage.

DESCRIPTION

BEFORE USING FOR THE FIRST TIME

1. Pull the appliance out of the package and remove the 

protective cardboard from the soleplate.

2. Clean the holes on the soleplate so the dirt, perhaps caught 

in the holes during the manufacture of the iron, could not stain 

the fabric.

3. Unreel the cord and plug into an outlet

4. Before switching on the unit, make sure that the mains 

voltage corresponds to the voltage specified on the body of the 

unit.

5. Before using the iron for the first time, first use a piece of 

unnecessary fabric to make sure the surface is clean enough.

6. Certain parts of the iron have been lightly greased therefore 

the iron could give off a little smoke when plugged in for the first 

time. This will cease after a short while.

FILLING THE WATER TANK

1. Before filling water, please pull out the plug first.

2. Set the steam knob to the off position.

3. Pull down the cover of water filling mouth.

4. Carefully fill the water tank with water.

5. Don not exceed the mark "MAX".

6. Use cleared water to fill the water tank. 

7. After you have finished ironing, open the water tank filler lid, 

turn the iron upside down and pour out the remaining water.

Warning!

 Do not use undiluted demineralized or flavored water.

SELECTING THE TEMPERATURE

1. Before ironing, always look at the temperature 

recommendations indicated on the garment tags.

2. If there is no garment tag with ironing instructions, but you 

know what type of material it is, you can use the following hints.

3. These hints can only be used for fibrous materials. It is best 

to iron other types of materials (crimped, raised, etc.) at low 

temperature.

4. If an items is made from a mixture of materials, then the 

ironing temperature should be set for the fabric with the lowest 

ironing temperature (for example, if an item is made from 60% 

polyester and 40% cotton, then it should be ironed a the 

temperature setting for polyester).

5. First, sort all of your clothes according to ironing 

temperature: wool with wool, etc. The irons heats faster than it 

cools, which is way it is recommended to begin ironing at low 

temperature, with synthetic fabrics, for example. Then proceed 

to ironing at higher temperatures. Cotton and flax should be 

ironed last.

6. Set the temperature regulator to the desired ironing 

temperature:

• position for nylon, silk 

• • position for wool

• • • position for cotton or linen (steam)

The  set  temperature  will  have  been  reached  when  the 

illuminated indicator turns off. The indicator will light again if the 

temperature of the iron falls below the set temperature.

STEAM IRONING

1. Fill the tank with water as it is described above.

2. Plug the iron to the network.

3. Set the temperature knob to the "• • •" or "MAX" position.

Note! 

Steam  can  only  be  selected  when  it  is  the  highest 

temperature  on  the  dial.  In  another  mode,  the  water  can  flow 

through the sole.

4. Wait until the power indicator light turns off. This means that 

the selected temperature is reached.

5. Set the steam knob to maximum position.

Note! 

When the ironing is finished, or in between, iron must be 

put in vertical position.

6. When the ironing is finished, unplug the iron, pour the 

remaining water from the tank and let the iron cool down.

DRY IRONING

1. Plug the iron to the network.

2. Turn the steam knob to minimum position

3. Set the temperature control to the suitable position, 

according to the type of fabric.

4. When the heating indicator light turns off, this means that the 

iron has heated to the set temperature and is ready for dry 

ironing.

Note! 

When the ironing is finished, or in between, iron must be 

put in vertical position.

5. Unplug the iron and let cool down.

SPRAY FUNCTION

Warning! 

You should keep enough water in the water tank to 

use this function.

Press the spraying button. Water will be sprayed out from the 

spraying nozzle.

Note! 

Before dry ironing of delicate fabrics it is recommended to 

pre-moisten them, using the function of spraying water or iron 

delicate fabrics through gauze. To avoid spots, do not use water 

spray for silk and synthetic fabrics.

STEAM BURST FUNCTION

Warning!

 Steam burst function can only be used when it is the 

highest temperature on the dial and water tank is not empty. 

1. Set the temperature dial at the "•••" or MAX position.

2. Press down the burst steam button.

3. Base plate will spray out bursting steam.

STEAM BURST FUNCTION

Warning!

 This function is only possible when on the controller is 

selected  the  highest  temperature  and  the  water  tank  is  not 

empty.

1. Set the temperature dial at the "•••" or MAX position.

2. When the heating indicator light turns off, this means that the 

iron has heated to the set temperature and is ready.

3. To obtain a powerful steam shock, press two or three times a 

steam burst button within a short period of time.

4. From the sole of the iron will come out a powerful steam flow.

Note!

 During burst steaming, a small amount of hot water can 

come out of the outlets of the sole of the iron.

Note! 

When  excessively  pressing  the  burst  steam  button,  the 

temperature of the soleplate of the iron may fall below the set. In 

this case, stop pressing the burst steam button and let the iron 

get hot.

5. When the ironing is complete, disconnect the iron from the 

mains, pour water from the tank and allow the iron to cool.

VERTICAL STEAMING

Warning!

  Vertical  steaming  can  only  be  used  when  it  is  the 

highest temperature on the dial and water tank is not empty. 

1. Set the temperature dial at the "•••" or MAX position.

2. The indicator light of the heating informs about the heating of 

the iron. When the heating indicator light turns off, this means 

that the iron has heated to the set temperature and is ready. 

3. Raise the iron to the clothes you want to iron, but do not 

touch it with the cloth.

4. Press the burst steam button at intervals of 4-5 seconds.

5. From the sole of the iron there will be a powerful steam flow.

Warning!

 Vertical steaming is not desirable to apply to synthetic 

fabrics. 

Warning!

  To  prevent  melting  of  the  fabric,  do  not  touch  the 

soleplate of the material.

Warning!

  It  is  forbidden  to  steam  clothes  on  a  person.  The 

steam temperature is very high and can cause burns. Use the 

hangers.

ANTI-DRIP

Iron automatically stops steaming when the temperature is too 

low to prevent water from dripping out of the soleplate.

CLEAN AND CARE

1. Unplug the appliance.

2. Allow the device to cool down.

3. Clean the appliance with a damp cloth/sponge.

4. Never immerse the unit into water!

5. Avoid moisture getting into parts of this appliance.

6. Never use sharp or abrasive to clean the appliance.

STORAGE

1. Unplug the unit.

2. Clean the unit before taking the unit for storage.

3. Empty and allow to dry out the water tank.

4. Wind the power cord.

5. Keep the unit in a dry cool place out of reach of children and 

disabled persons.

6. Always keep the iron in an upright position. 

TECHNICAL SPECIFICATIONS

Supply voltage: 220-240V 50/60Hz 

Power: 2000W 

Water tank: 240ml

Note: 

Due  to  the  constant  process  of  making  changes  and 

improvements,  there  may  be  some  differences  between  the 

instruction  and  the  product.  The  manufacturer  hopes  that  the 

user will pay attention to this.

TROUBLESHOOTING

Recommended usage period - 3 years

More info: www.magio.ua 

Questions  regarding  exploitation  of  MAGIO  appliances: 

support@magio.ua  Manufacturer  reserves  the  right  to  change 

design  and  specifications,  complete  set,  color  scheme  of  the 

item, warranty period, etc. without prior notice.

P

R

OBLEM 

POSSIBLE 

R

EASON 

POSSIBLE SOLU

T

ION 

Wat

e

r flow

s

t

h

roug

h

h

ol

es

 in t

he

s

ol

e

plat

e

•

The

se

l

e

ct

e

d 

t

e

mp

e

ratur

e

 i

s

 not 

s

uffici

e

nt to g

e

n

e

rat

e

s

t

e

am. 

•

The

 iron i

s

 not 

he

at

e

d 

e

noug

h

 to u

se

s

t

e

am. 

•

The

s

t

e

am 

s

upply i

s

too 

s

trong. 

•

The

 iron wa

s

s

tor

e

d in 

a 

h

orizontal po

s

ition, 

t

he

 r

ese

rvoir wa

s

 not 

e

mpti

e

d, t

he

 control 

knob wa

s

 not off. 

•

 S

e

t t

he

 t

e

mp

e

ratur

e

 dial 

at t

he

 "

•••

" or MAX 

po

s

ition. 

•

 Wait for t

he

 warning 

lig

h

t to turn off. 

•

Re

duc

e

s

t

e

am flow. 

•

 S

ee

se

ction "Iron 

s

torag

e

". 

Brown 

s

tain

s

 from 

t

he

s

ol

es

s

tain t

he

laundry. 

•

 U

se

 of c

he

mical 

product

s

 for d

es

caling. 

•

 Fabric fib

e

r

s

 ar

e

s

tuff

e

d into t

he

h

ol

es

 of 

t

he

s

ol

e

 and c

h

arr

e

d. 

•

 Do not add any 

d

es

caling product

s

 to t

he

tank. 

•

 P

e

rform 

se

lf

-

cl

e

aning 

and u

se

 only cl

e

an wat

e

r. 

•

 Cl

e

an t

he

s

ol

e

 wit

h

 a 

non

-

m

e

tallic wa

sh

clot

h

. 

From tim

e

 to tim

e

, cl

e

an 

t

he

h

ol

es

 of t

he

s

ol

e

. 

ENGLISH: