DEAR CUSTOMER!
The staff of the company “Magio” thanks you for the
choice you have made in favor of the products of our
brand and guarantees a high quality of working of
the purchased items if you follow the manual.
ENG
INSTRUCTION MANUAL
When using electrical appliances, basic precautions
should always be followed, which include the
following:
1. Read all instructions before use or cleaning.
2. Close supervision is necessary when any appliance is
used near children.
3. Do not immerse cord, plug, or any part of the
appliance in water or other liquids.
4. Do not let cord hang over edge of table or counter,
or touch hot surfaces.
5. Do not operate appliance with damaged cord or
plug or after the appliance malfunctions, or has been
damaged in any manner.
6. If the appliance is damaged or broken, do not repair
yourself, if the power cord or the plug is broken or
damaged, do not repair or change yourself, please
send the appliance to qualified service centre for repair
or service.
7. Unplug from outlet when not in use and before
cleaning. Always hold the plug, but never pull the cord.
8. Do not cover any part of the oven with metal or
cloth, it may cause overheating of the appliance.
9. Never leave the appliance unattended in working
10. Do not use any accessories other than
manufacturer recommended accessories.
11. Do not use this appliance for any use other than its
intended use.
12. This appliance is for HOUSEHOLD USE only.
13. Before putting the appliance for long-time storage
or before cleaning. Plug it off an outlet and let the
appliance cool down.
14. Do not touch hot surfaces of the iron. Use the knob
and buttons.
15. To pour water into the iron, unplug it.
16. Never leave your iron lying on the ironing board.
Always place it vertically on the heel-reliance, even if
you do break between the ironing.
17. Hot steam is dangerous. Do not direct steam at
people.
18. Do not iron or steam clothes worn on the person.
19. Do not pour vinegar or liquid against the scum in
the water tank.
20. Avoid contacts between the soleplate and sharp
metal surfaces that will prevent scratches on the
bottom and prolong its service life.
21. Before you pack the appliance let it cool completely
in the vertical position.
DESCRIPTION
1. Soleplate
2. Metal decoration
3. Spray nozzle
4. Fill cover
5. Decoration
6. Steam dial
7. Burst steam button
8. Spray button
9. Rubberized handle
10. Cord guard
11. Back cover
12. Body
13. Pilot light
14. Temperature dial
15. Water tank
16. Self-clean button
17. Skirt
BEFORE USING FOR THE FIRST TIME
1. Pull the appliance out of the package and remove
the protective cardboard from the soleplate.
2. Clean the holes on the soleplate so the dirt, perhaps
caught in the holes during the manufacture of the iron,
could not stain the fabric.
3. Unreel the cord and plug into an outlet
4. Before switching on the unit, make sure that the
mains voltage corresponds to the voltage specified on
the body of the unit.
5. Certain parts of the iron have been lightly greased
therefore the iron could give off a little smoke when
plugged in for the first time. This will cease after a short
while.
USING THE IRON
FILLING THE WATER TANK
1. Before filling water, please pull out the plug first.
2. Set the steam dial to the minimum position.
3. Pull down the cover of water filling mouth.
4. Carefully fill the water tank with water.
5. Don not exceed the mark “MAX”.
6. Use tap water to fill the water tank. If the tap water is
hard, then it is recommended you mix it with distilled
water at rate 1:1.
7. Do not use undiluted demineralized or flavored
water.
SELECTING THE TEMPERATURE
1. Check the ironing instructions on the garment to be
ironed.
2. If the garment does not have any ironing instructions
but you know the kind of fabric in question, use the
chart below.
3. Fabrics that have some kind of finish (polishing,
wrinkles, and contrasts) can be ironed at the lowest
temperatures.
4. If the fabric contains several kinds of fibres, always
select the temperature applicable, if an article contains
60% polyester and 40% cotton, you must always
choose the temperature corresponding to polyester
and without steam.
5. First classify the articles to be ironed according to the
most suitable ironing temperature: wool with wool,
cotton with cotton, etc. as the iron heats up as fast as it
cools, start by ironing the articles requiring the lowest
temperature such as those made of synthetic fibres.
Progress towards those that require the highest
temperatures.
6. Turn the temperature dial until it is in front of the
appropriate signal according to the following:
• position for acrylic, silk
•• position for wool
•••position for cotton or linen (steam)
STEAM IRONING
1. Fill the tank with water as it is described above.
2. Plug the iron to the network.
3. Steam can only be selected when it is the highest
temperature on the dial. In another mode, the water
can flow through the sole.
4. Wait until the power indicator light turns off. This
means that the selected temperature is reached.
5. Set the steam dial to maximum position.
6. When the ironing is finished, or in between, iron
must be put in vertical position.
7. Unplug the iron. Pour the remaining water from the
tank, let the iron cool down.
DRY IRONING
1. Plug the iron to the network.
2. Turn the steam dial to minimum position
3. Set the temperature control to the suitable position
4. When the ironing is finished, or in between, iron
must be put in vertical position.
5. Unplug the iron.
SPRAY FUNCTION
1. Press the spraying button.
2. Water will be sprayed out from the spraying nozzle
3. You should keep enough water in the water tank to
use this function.
STEAM BURST FUNCTION
1. Steam burst function can only be used when it is the
highest temperature on the dial and water tank is not
empty.
2. Set the temperature dial at the “•••” or MAX position.
3. Press down the burst steam button.
4. Base plate will spray out bursting steam.
VERTICAL STEAMING
1. Vertical steaming can only be used when it is the
highest temperature on the dial and water tank is not
empty.
2. Set the temperature dial at the “•••” or MAX position.
3. Hold the iron vertically at the distance 15-30 cm from
the clothes.
4. Press steam burst button with a 4-5 seconds interval.
5. Steam will be released from the holes in the iron
soleplate.
ATTENTION!
• Vertical steaming is not recommended for
synthetic fabrics.
• To avoid melting the fabric, do not touch the iron
soleplate to the item while steaming.
• Never steam iron clothes on a person as the steam
temperature is very high and it can cause burns.
Use a coat-hanger or a stand.
SELF-CLEANING
1. Fill water tank with water.
2. Plug the iron into the mains.
3. Set the temperature dial to the MAX position.
4. Wait for about 3 minutes and then press the
self-clean button for about 1 minute.
5. Strong steam and hot water will be sprayed to clean
the steam chamber.
6. Use the function once every two week.
ANTI-DRIP
• Iron automatically stops steaming when the
temperature is too low to prevent water from dripping
out of the soleplate.
TROUBLESHOOTING
- Iron emits an odor or smoke
Iron gives off an odor when turned on for the first time.
Oils used during manufacture need to be burnt off
allow ten minutes for odor to disappear.
- Iron does not heat
The iron should be plugged into a 220-240 V, AC
electrical outlet only. The temperature dial must be set
at the desired temperature.
- Iron does not steam
The water tank should not be empty. Turn the steam
dial to the minimum position and add water. Allow the
iron to heat, and then set the steam dial to the steam
setting.
- Steam burst function does not work
The water tank must be at least 1/4 full .Temperature
dial must be set at the “•••” or MAX position. Iron should
be in the horizontal position. Prime pump briefly. Allow
a short pause between shots. Be sure to fully depress
the burst of steam button.
- Spray function does not work
The water tank must be at least 1/4 full. Fill the iron as
described in the section “filling the water tank”.
- Iron is leaking
The steam dial must be set on max position after the
iron is hot. The temperature setting is too low to
produce steam. Burst steam function used too much,
allow iron to re-heat.
CLEANING AND CARE
1. Unplug the appliance before cleaning, empty it and
allow it to cool down.
2. Wipe the outer surface of the appliance with a damp
cloth. Use soft detergents to remove impurities; do not
use metallic brushes or abrasive detergents.
STORAGE
1. After using the Iron unplug it and pour out water
from water tank.
2. Keep the appliance in a vertical position, in a dry cool
place.
SPECIFICATION
Supply voltage: 220-240V 50/60Hz
Power: 2200 W
Water tank: 240 ml
More info: http://magio.kiev.ua/
Questions regarding exploitation of MAGIO appliances:
support@magio.kiev.ua
