background image

DEAR CUSTOMER!

The staff of the company “Magio” thanks you for the 

choice you have made in favor of the products of our 

brand and guarantees a high quality of working of 

the purchased items if you follow the manual.

 ENG 

 INSTRUCTION MANUAL

When using electrical appliances, basic precautions 

should  always  be  followed,  which  include  the 

following:

1. Read all instructions before use or cleaning.

2. Close supervision is necessary when any appliance is 

used near children.

3. Do not immerse cord, plug, or any part of the 

appliance in water or other liquids.

4. Do not let cord hang over edge of table or counter, 

or touch hot surfaces.

5. Do not operate appliance with damaged cord or 

plug or after the appliance malfunctions, or has been 

damaged in any manner.

6. If the appliance is damaged or broken, do not repair 

yourself, if the power cord or the plug is broken or 

damaged, do not repair or change yourself, please 

send the appliance to qualified service centre for repair 

or service.

7. Unplug from outlet when not in use and before 

cleaning. Always hold the plug, but never pull the cord.

8. Do not cover any part of the oven with metal or 

cloth, it may cause overheating of the appliance.

9. Never leave the appliance unattended in working

10. Do not use any accessories other than 

manufacturer recommended accessories.

11. Do not use this appliance for any use other than its 

intended use.

12. This appliance is for HOUSEHOLD USE only.

13. Before putting the appliance for long-time storage 

or before cleaning. Plug it off an outlet and let the 

appliance cool down.

14. Do not touch hot surfaces of the iron. Use the knob 

and buttons.

15. To pour water into the iron, unplug it.

16. Never leave your iron lying on the ironing board. 

Always place it vertically on the heel-reliance, even if 

you do break between the ironing.

17. Hot steam is dangerous. Do not direct steam at 

people.

18. Do not iron or steam clothes worn on the person.

19. Do not pour vinegar or liquid against the scum in 

the water tank.

20.  Avoid  contacts  between  the  soleplate  and  sharp 

metal surfaces that will prevent scratches on the 

bottom and prolong its service life.

21. Before you pack the appliance let it cool completely 

in the vertical position.

DESCRIPTION

1. Soleplate

2. Metal decoration

3. Spray nozzle

4. Fill cover

5. Decoration

6. Steam dial

7. Burst steam button

8. Spray button

9. Rubberized handle

10. Cord guard

11. Back cover

12. Body

13. Pilot light

14. Temperature dial

15. Water tank

16. Self-clean button

17. Skirt

BEFORE USING FOR THE FIRST TIME

1. Pull the appliance out of the package and remove 

the protective cardboard from the soleplate.

2. Clean the holes on the soleplate so the dirt, perhaps 

caught in the holes during the manufacture of the iron, 

could not stain the fabric.

3. Unreel the cord and plug into an outlet

4. Before switching on the unit, make sure that the 

mains voltage corresponds to the voltage specified on 

the body of the unit.

5. Certain parts of the iron have been lightly greased 

therefore the iron could give off a little smoke when 

plugged in for the first time. This will cease after a short 

while.

USING THE IRON

FILLING THE WATER TANK

1. Before filling water, please pull out the plug first.

2. Set the steam dial to the minimum position.

3. Pull down the cover of water filling mouth.

4. Carefully fill the water tank with water.

5. Don not exceed the mark “MAX”.

6. Use tap water to fill the water tank. If the tap water is 

hard, then it is recommended you mix it with distilled 

water at rate 1:1.

7. Do not use undiluted demineralized or flavored 

water.

SELECTING THE TEMPERATURE

1. Check the ironing instructions on the garment to be 

ironed.

2. If the garment does not have any ironing instructions 

but you know the kind of fabric in question, use the 

chart below.

3. Fabrics that have some kind of finish (polishing, 

wrinkles, and contrasts) can be ironed at the lowest 

temperatures.

4. If the fabric contains several kinds of fibres, always 

select the temperature applicable, if an article contains 

60% polyester and 40% cotton, you must always 

choose the temperature corresponding to polyester 

and without steam.

5. First classify the articles to be ironed according to the 

most suitable ironing temperature: wool with wool, 

cotton with cotton, etc. as the iron heats up as fast as it 

cools, start by ironing the articles requiring the lowest 

temperature such as those made of synthetic fibres. 

Progress towards those that require the highest 

temperatures.

6. Turn the temperature dial until it is in front of the 

appropriate signal according to the following:

• position for acrylic, silk

•• position for wool

•••position for cotton or linen (steam)

STEAM IRONING

1. Fill the tank with water as it is described above.

2. Plug the iron to the network.

3. Steam can only be selected when it is the highest 

temperature on the dial. In another mode, the water 

can flow through the sole.

4. Wait until the power indicator light turns off. This 

means that the selected temperature is reached.

5. Set the steam dial to maximum position.

6. When the ironing is finished, or in between, iron 

must be put in vertical position.

7. Unplug the iron. Pour the remaining water from the 

tank, let the iron cool down.

DRY IRONING

1. Plug the iron to the network.

2. Turn the steam dial to minimum position

3. Set the temperature control to the suitable position

4. When the ironing is finished, or in between, iron 

must be put in vertical position.

5. Unplug the iron.

SPRAY FUNCTION

1. Press the spraying button.

2. Water will be sprayed out from the spraying nozzle

3. You should keep enough water in the water tank to 

use this function.

STEAM BURST FUNCTION

1. Steam burst function can only be used when it is the 

highest temperature on the dial and water tank is not 

empty.

2. Set the temperature dial at the “•••” or MAX position.

3. Press down the burst steam button.

4. Base plate will spray out bursting steam.

VERTICAL STEAMING

1. Vertical steaming can only be used when it is the 

highest temperature on the dial and water tank is not 

empty.

2. Set the temperature dial at the “•••” or MAX position.

3. Hold the iron vertically at the distance 15-30 cm from 

the clothes.

4. Press steam burst button with a 4-5 seconds interval.

5. Steam will be released from the holes in the iron 

soleplate.

ATTENTION!

•  Vertical  steaming  is  not  recommended  for 

synthetic fabrics.

• To avoid melting the fabric, do not touch the iron 

soleplate to the item while steaming.

• Never steam iron clothes on a person as the steam 

temperature  is  very  high  and  it  can  cause  burns. 

Use a coat-hanger or a stand.

SELF-CLEANING

1. Fill water tank with water.

2. Plug the iron into the mains.

3. Set the temperature dial to the MAX position.

4. Wait for about 3 minutes and then press the 

self-clean button for about 1 minute.

5. Strong steam and hot water will be sprayed to clean 

the steam chamber.

6. Use the function once every two week.

ANTI-DRIP

•  Iron  automatically  stops  steaming  when  the 

temperature is too low to prevent water from dripping 

out of the soleplate.

TROUBLESHOOTING

- Iron emits an odor or smoke

Iron gives off an odor when turned on for the first time. 

Oils used during manufacture need to be burnt off 

allow ten minutes for odor to disappear.

- Iron does not heat

The  iron  should  be  plugged  into  a  220-240  V,  AC 

electrical outlet only. The temperature dial must be set 

at the desired temperature.

- Iron does not steam

The water tank should not be empty. Turn the steam 

dial to the minimum position and add water. Allow the 

iron to heat, and then set the steam dial to the steam 

setting.

- Steam burst function does not work

The water tank must be at least 1/4 full .Temperature 

dial must be set at the “•••” or MAX position. Iron should 

be in the horizontal position. Prime pump briefly. Allow 

a short pause between shots. Be sure to fully depress 

the burst of steam button.

- Spray function does not work

The water tank must be at least 1/4 full. Fill the iron as 

described in the section “filling the water tank”.

- Iron is leaking

The steam dial must be set on max position after the 

iron is hot. The temperature setting is too low to 

produce steam. Burst steam function used too much, 

allow iron to re-heat.

CLEANING AND CARE

1. Unplug the appliance before cleaning, empty it and 

allow it to cool down.

2. Wipe the outer surface of the appliance with a damp 

cloth. Use soft detergents to remove impurities; do not 

use metallic brushes or abrasive detergents.

STORAGE

1.  After  using  the  Iron  unplug  it  and  pour  out  water 

from water tank.

2. Keep the appliance in a vertical position, in a dry cool 

place.

SPECIFICATION

Supply voltage: 220-240V 50/60Hz

Power: 2200 W

Water tank: 240 ml

More info: http://magio.kiev.ua/

Questions regarding exploitation of MAGIO appliances: 

support@magio.kiev.ua

Reviews: