background image

24

Be sure to add a few drops of oil to the blades before running.

Don’t forget to tighten the screws after the blades have been 

aligned.

Do not immerse the body of the appliance in any liquid, rinse it 

under running water or place it in the dishwasher.
Never  use  sharp  or  abrasive  items  when  cleaning  the 

appliance.

3. Lift off the small moving blade and replace it with the new one on 

the plastic oscillator (pic. 3).

4. Replace the fixed blade using the screws and lightly tighten them. 

Adjust the teeth (pic. 4), to a gap of 0,5-1 mm and the small, moving 

blade as centered and parallel as possible to the fixed blade’s teeth.

Cleaning and maintenance

To  maintain  optimum  performance,  the  appliance  should  be 

cleaned after each use.

1.  Blow  away  any  remaining  hair  on  the  blades  or  use  the 

cleaning brush provided.

2. Remove  the  comb  guide.  The  comb  guide  can  be  rinsed 

under  running  water.  Ensure  they  are  dried  thoroughly  before 

storage or further use.

3. Oil  the  blades  after  every  use  to  ensure  optimum  cutting 

performance.

Storage

1.  Unplug the unit.

2. Clean it and thoroughly dry the unit before taking the unit for 

storage.

3. Wind the power cord.

4. Keep the unit in a dry cool place out of reach of children and 

disabled persons.

Technical specifications

Battery type: 

2000mAh Lithium battery

Charger: 

Input: 

100–240V ~ 50/60Hz 0.2A

Output: 

5VDC, 1000mA, 5W

EN

Summary of Contents for MG-585





























Reviews: