EN
24
25
1.3 Risk of Explosion
Do not store explosive substances such as aerosol cans in
the device
1.4 Risk of Fire
• When setting up the device, ensure that the connecting
cable is not pinched or damaged
• Keep the ventilation openings clear on all sides, ensure that
there is sufficient ventilation for installation constructions
• Do not use mechanical devices or other aids to accelerate
the defrosting process
• Do not damage the cooling circuit
1.5 Risk of Health
• First check whether the cooling capacity is sufficient for
your application and whether it meets the requirements for
cooling your food or drugs
• Foodstuffs may only be stored in the device in their original
packaging or suitable containers
• If the lid of the device is left open for a long period of time
there may be a strong temperature increase in the cooling
compartments
• If you do not use the device for a longer period of time,
please switch it off. Defrost the device completely. Clean and
dry all surfaces thoroughly (see chapter 4)
WARNING
CAUTION
x
x
x
x
x = 50 mm X = 2 inch
• Leave the lid open (at least in the ventilation position) to
prevent mold growth.
• Clean the surfaces that may come into contact with food
regularly
1.6 Risk of Damage
• Only transport the device in an upright position
• Compare the existing power supply with the voltage specifi-
cation on the nameplate
• Do not use any electrical appliances inside the mobile fridge
unless it is recommended by the manufacturer
• The device may not be exposed to rain
• At the end of its service life, this device must be disposed
correctly (see chapter 7)
ATTENTION
