EN
28
29
3 Handling
3.1 Connecting the Device
Only connect the device to the power supply system with the
supplied cable
To 12V On-board Power Supply of Vehicles
For connection to the 12V/24V on-board power supply of
vehicles, please use this connection cable. Use the 12V/24V
socket (cigarette lighter)
To the Electrical Grid
Use this cable to connect the device to the electrical grid.
3.2 Switch On
If the device is connected to the power supply, press the
On/Off button
15
for at least 3 seconds to start the device.
For optimum cooling performance, use food which has alrea-
dy been cooled down.
3.3 Settings
Press the SET button
16
briefly to enter the different modes
of the device.
Then press the SET button
16
again to switch the desired
mode.
ECO Energy Saving Mode
MAX Fast Cooling Mode
Please note:
The factory setting for
delivery is
MAX
