44
4 Commissioning
Always check the power consumption of the connected electrical
appliances. Expect the power consumption of electrical appliances
to increase as soon as they are started. These power peaks can
be up to 5 times the rated power for short periods. Devices with
such high starting currents are e.g. air conditioners, hoovers, hand
tools and pumps. Always check that these start peaks are within the
capacity limits of the inverter. If you want to operate several devices
simultaneously, calculate the total power required.
4�1 Assembly of the Device
Always take this into account during assembly:
• Install the device in a dry place where it is protected from
moisture and dirt
• Make sure that moisture and dirt cannot be sucked in by the
ventilation
• Ensure that there is sufficient space (min. 10 cm) around the
device on all sides to allow sufficient air circulation
• Provide a ventilation opening if necessary
• The ambient temperature must be between 0 °C and +40 °C.
Optimal are +15 °C to +25 °C
• First connect the input voltage and then switch on the
inverter
4�2 Recommended Battery Cables
Connection cable is included in delivery.
!
Note capacity!
If the recommended total capacity of the batteries is
not reached, there may be a loss of performance or
severe restrictions on use due to voltage drops
