1-800-MAGLINE (624-5463)
Page 15 www.magliner.com
CooLift
®
D
C
A
B
REMOVING THE DECK
TOOLS NEEDED: #3 PHILLIPS SCREWDRIVER, FLAT HEAD SCREWDRIVER, 7/16” WRENCH
1)
Place the CooLift on a level flooring surface with the holding brake engaged.
2) Raise the deck to the highest position.
3)
Turn off main power switch.
Disconnect batteries.
4) Remove the
two screws connecting the deck to the hydraulic cylinders.
5) Remove the four screws and lock nuts connecting the back of the deck to the yokes.
6) Pull deck forward out of the yokes; use light blows with a soft mallet if needed.
7) Reconnect batteries.
Item
Qty. Part Number
A Deck
1
309825
B Flat head machine screw - 1/4” -20 x 2” long
4
80224
C Hex lock nut - 1/4”-20
4
80675
D Slotted truss head screw - 3/8”-16 x 1/2” long
2
80286
REPLACING BACK PANEL LATCH
TOOLS NEEDED: #3 PHILLIPS SCREWDRIVER
1) Remove back panel from the unit. Remove the damaged latch from back panel.
2) Insert new latch in the orientation shown below. Position the mounting bracket on the opposite side for the panel.
3) Install enclosed screw through the bracket and latch; tighten.
4) Adjust the clamp screw:
• Loosen jam nut.
•
Adjust the screw in or out until latch will firmly secure door in place.
• Tighten jam nut.
Item
Qty.
Part
Number
A Back access panel latch (includes
items below, not sold separately)
1
309573
B
Screw
1
-
C
Mounting bracket
1
-
D
Latch assembly
1
-
NOTE - full back panel assembly replacement part
number is 309842.
D
A
C
B
