M A G M A
Chapter 4 Install 3rd Party PCI Cards
13
hard drives. The cages mount into the hard drive
area in the chassis identified by a
in the previous
graphic. If you want to install a hard drive in your
system, a PCI hard drive controller card must also
be installed into one of the available PCI slots.
You will also have to remove a 5V Load Resistor
from the hard drive area before installing any hard
drive cages. Instructions for removing the 5V Load
Resistor are included with the hard drive cage.
DANGER
The Load Resistor is
and
must NOT BE TOUCHED unless the
system has been shut off for at least 25-
30 minutes. Use caution when touching
the Load Resistor.
System Should Be Up and Running
Apply power to the Magma expansion chassis first, then power up the
computer.
Use the procedures detailed in
to confirm the card
installation(s) in the Windows Device Manager or Apple System Profiler.
When everything is functioning correctly, your Windows Device
Manager should look something like this:
