13
INSTALLATION INSTRUCTIONS
CLAMP INSTALLATION
This fixture features mounting points on the under side for an Omega bracket, which can
then be attached to a mounting clamp. This fixture also features a safety cable loop lo-
cated on the under side. (see the illustration below). When mounting this fixture to truss,
be sure to secure appropriately rated clamps (not included) to the mounting brackets,
and attach separate
SAFETY CABLES
of the appropriate rating to the safety cable loop.
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHEN INSTALLING THIS FIXTURE IN
A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT
FALL IN THE EVENT THAT THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculat-
ing working load limits, understanding the installation material being used, and periodic
safety inspection of all installation material and the fixture. If you lack these qualifica-
tions, do not attempt the installation yourself. Improper installation can result in bodily
injury.
