MAGRF MODULE
OPERATION
1. Locate the card input slots on your Magmatic device. Use a screwdriver to remove the slot cover for
one of the input slots, then insert the MagRF module and fasten it in place with the module’s mount-
ing screws.
2. Check the display screen on your Magmatic device. The Bluetooth icon and the letters “RF” should
appear at the top of the screen, as shown below.
3. Select the Personality icon on your Magmatic device’s touch screen, then select the “MagRF Learn”
option. Press any of the four keys on the transmitter to pair the transmitter. If pairing is successful, a
notification reading “Connected” will appear. On the other hand, if no action is taken within 20 sec-
onds, or if pairing is unsuccessful, a prompt reading “Connection Failed” will appear.
4. After the receiver and transmitter are paired, the transmitter can be used to control the operation of
the device. The assigned functions of each of the four keys on the transmitter vary with the particular
device model. See your device’s user manual for information.
24
